Clock Oscillator Differential CXO3225PQN2.5   
  LVPECL  2.5V; ultra low jitter,  with PLL

  • SMD in ceramic case (3.2 x 2.5 x 1.3) mm
  • Tri-State Enable / Disable   on pad No. 1
  • LVPECL  Differential Output Wave Form
  • High Q fundamental crystal + ultra low jitter 
    multiplier circuit
  • RoHS conform;  Lead-free product; 
    on Tape (16mm) & Reel
  • Vibration: MIL-STD-202F method 204, 
                   35G, 50 to 2000 Hz
  • Shock:     MIL-STD-202F method 213B, 
                   test cond. E, 1000GG 1/2 sine wave
  • Available in many standard and special frequencies
 Clock Oscillator Differential CXO3225PQN2.5
       
 LVPECL Square Wave Output Wave Form
Specifications
Holder Type: Clock Oscillator CXO3225PQN2.5  ; 2.5V(Voltage code is "2.5"); Tri-State on pad 1
Frequency Range: 150 MHz  to  1500.0 MHz
Frequency Stability at 25°C: ±25 ppm / ±50 ppm
Operating Temperature Range: ±25 ppm,  -40°C to +85°C / ±50 ppm,  -40°C to +85°C
Storage Temperature: -55°C  to  +125°C
Power Supply Voltage (Vdd): + 2.5V  D.C.    ± 10%
Maximum Supply Current (Differential): 68mA max.
Current with Output: 16 mA typical
Output Voltage (VOH) (VOL): High "1" Vdd-1.03V min,  Vdd- 0.6Vmax.
Low  "0" Vdd-1.85V min,  Vdd- 1.6Vmax.
Start Up Time: 10 ms max.
Output Symmetry (Duty Cycle): 50% ± 2%max. (measured at 50% Vdd)
Load: Differential
Rise (Tr) /Fall Time (Tf): 0.2ns typical; 0.5ns max.  (10%Vdd<->90%Vdd, 15pF load)
OE Function Pin 1: -Enable: When 70% min. of VDD to Enable Output.(Open connection prohibit.)
-Disable:When 30% max. of VDD to Disable Output. (high impedance).
Ouput Enable Time / Disable Time: 200 nS. Max. / 50 nS. Max.
Phase Jitter: 0.6 ps typ.  (12 kHz to 20 MHz); < 100 fs (1.875 MHz to 20MHz)
Phase Noise (156.250 MHz):   -67dBc/Hz @ 10Hz,    -92dBc/Hz @ 100Hz,   -112dBc/Hz @ 1kHz
-121dBc/Hz @ 10kHz, -124dBc/Hz @ 100kHz, -136dBc/Hz @ 1MHz,
-153dBc/Hz @ 5MHz
Aging: < ±2ppm max. for the first year; ±10ppm max.over 10 years
Reflow Condition: 260°C max for 10 sec.
Germany:   COMTEC CRYSTALS GmbH
Sultenstr. 12-14  ·  85586 Poing / GERMANY
Tel +49 8121 778160 · Fax +49 8121 778177
e-Mail     info@comtec-crystals.com
Internet  http://www.comtec-crystals.com
Subject to change without prior notice
TÜV ISO 9001COMTEC LOGO

Technical data and graphics are all
copyrighted (c) by Comtec Crystals Group
France:  COMTEC CRYSTALS SARL
23, rue du Faucon · 67500 Haguenau / FRANCE
  Tel +33 388 732162 · Fax +33 388 730118
e-Mail  sales@comtec-crystals.com
Internet  http://www.comtec-crystals.com
Sous réserve de modifications