VCXO LVDS Differential Oscillator, VCXO7050DF3.3  3.3V, 
  ultra low jitter

  • SMD in ceramic case (7.0 x 5.0 x 1.8) mm
  • LVDS  Square Wave  Output Wave Form
  • High Q fundamental crystal 
    + ultra low jitter multiplier circuit
  • RoHS conform;  Lead-free product
  • Vibration: MIL-STD-202F method 204, 
                   35G, 50 to 2000 Hz
  • Shock:     MIL-STD-202F method 213B, 
                   test cond. E, 1000GG 1/2 sine wave
  • Available in many standard and special frequencies
 VCXO LVDS Differential Oscillator
       
 LVDS Square Wave Output Wave Form
Specifications - Product No. G100000000CZUUPC43BB
Holder Type: VCXO LVDS Differential Oscillator, 
CXO7050DF3.3  3.3V(Voltage code is "3.3"); Tri-State on pad  2
Frequency: 100.000000 MHz
Frequency Stability at 25°C: ± 50.0 ppm
Operating Temperature Range: ± 50.0 ppm  over   -40°C  to  +85°C  (incusive of 25°C tolerance, 
± 10% input voltage variation, load change, aging, shock and vibration )
Frequency Deviation: ±100ppm
Storage Temperature: -55°C  to  +150°C
Power Supply Voltage (Vdd): + 3.3V  D.C.    ± 5%
Maximum Supply Current (15pF load): 65 mA
Load: RL=50 ?  for  (Vdd-2.0V)
Output Logic Levels: High "1" Voh  Vdd-1.025min., -0.95typ., -0.88max. ;  RL= 50 ?  to (Vdd-2.0V)
Low  "0" VoL  Vdd-1.810min., -1.70typ., -1.62max.;   RL= 50 ?  to (Vdd-2.0V)
Output Symmetry (Duty Cycle): 50% ± 5%max.@ Vdd-1.3V
Voltage Control: 1.65V DC  Center  /   0.3V  to  3.0V  Range
Rise/Fall Time: 0.4ns typical, 0.55ns max. @ 20% to 80% of PECL wave form
Start Up Time: 10 ms max.
Tri-state Function  Pin  2: When Pin 2  = 1,        Output Enable
When Pin 2 (at 0.0V), Output High impedance, Disable current: 50µA max.
Phase Jitter (12 kHz to 20 MHz): 0.4 ps typ.,  0.5 ps max., for 156.250MHz
Phase Noise (156.250 MHz):   -62dBc/Hz @ 10Hz,    -92dBc/Hz @ 100Hz,   -120dBc/Hz @ 1kHz
-132dBc/Hz @ 10kHz, -128dBc/Hz @ 100kHz, -140dBc/Hz @ 1MHz
Aging: < ±3ppm max. for the first year
Input Impedance: 60 k? (min.)
Reflow Condition: 260°C max for 10 sec.
Germany:   COMTEC CRYSTALS GmbH
Sultenstr. 12-14  ·  85586 Poing / GERMANY
Tel +49 8121 778160 · Fax +49 8121 778177
e-Mail     info@comtec-crystals.com
Internet  http://www.comtec-crystals.com
Subject to change without prior notice
TÜV ISO 9001COMTEC LOGO

Technical data and graphics are all
copyrighted (c) by Comtec Crystals Group
France:  COMTEC CRYSTALS SARL
23, rue du Faucon · 67500 Haguenau / FRANCE
  Tel +33 388 732162 · Fax +33 388 730118
e-Mail  sales@comtec-crystals.com
Internet  http://www.comtec-crystals.com
Sous réserve de modifications