Differential HCSL Clock Oscillator, no PLL
  CXO7050CK3.3,  3.3V, 200 fsec Jitter

  • SMD in ceramic case (7.0 x 5.0 x 1.8) mm
  • Tri-State Enable / Disable   on pad No. 1
  • Femto second integrated phase jitter 
    (200 fs typical, 12 KHz to 20 MHz)
  • Superior phase noise (-138 dBc/Hz at 10 KHz and
     -144 dBc/Hz at 100 KHz offset)
  • RoHS conform;  Lead-free product; 
    on Tape (16mm) & Reel
  • Vibration: MIL-STD-202F method 204, 
                   35G, 50 to 2000 Hz
  • Shock:     MIL-STD-202F method 213B, 
                   test cond. E, 1000GG 1/2 sine wave
  • High performance with surprisingly low price
 External Dimensions
       
 HCSL Output Wave Form
Specifications - Product No. G056448000QARUPN43CB
Holder Type: CXO7050CK3.3; 3.3V(Voltage code is "3.3"); Tri-State on pad 1
Frequency: 56.448000 MHz
Frequency Stability at 25°C: ± 100 ppm
Operating Temperature Range: ± 100 ppm  over   -40°C  to  +85°C  (incusive of 25°C tolerance, 
±10% input voltage variation, load change, aging, shock and vibration )
Storage Temperature: -55°C  to  +125°C
Power Supply Voltage (Vdd): + 3.3V  D.C.    ±10%
Maximum Supply Current (15pF load): 17.0mA typ.
Output Swing: 620 mV min; 700 mV typical; 780 mV max.
Output Logic Levels: High "1" Voh  660 mV min.;   740 mV typical; 850 mV max.
Low  "0" VoL -150 mV min.;      0 mV typical; 150 mV max.
Output Symmetry (Duty Cycle): 50% ± 5% max. measured at Q and complimentary Q cross point
Load: RL=50 Ohm   to ground on each output
Rise/Fall Time: 0.15 ns. typ; 0.4 ns. max. 20%->80% of HCSL waveform/(RL =100?, CL = 10pF)
Start Up Time: 3 ms typical; 10 ms max.
OE Function: -Enable: When 70% min. of VDD to Enable Output.
 Enable time: 10ms
-Disable:  When 30% max. of VDD to Disable Output.
 Disable current : 10 µA, Disable time : 0,2 µs (max.)
Phase Jitter (12 kHz to 20 MHz): 0,2ps typical;  for 155,520 MHz
Phase Noise (125 MHz):   -50dBc/Hz @ 10Hz,    -82dBc/Hz @ 100Hz,     -116dBc/Hz @ 1kHz
-138dBc/Hz @ 10kHz, -144dBc/Hz @ 100kHz,   -149dBc/Hz @ 1MHz,
-155dBc/Hz @ 10MHz
Aging: < ±3ppm max. for the first year; ±2ppm max. per year thereafter
Reflow Condition: 260°C max for 10 sec.
Germany:   COMTEC CRYSTALS GmbH
Sultenstr. 12-14  ·  85586 Poing / GERMANY
Tel +49 8121 778160 · Fax +49 8121 778177
e-Mail     info@comtec-crystals.com
Internet  http://www.comtec-crystals.com
Subject to change without prior notice
TÜV ISO 9001COMTEC LOGO

Technical data and graphics are all
copyrighted (c) by Comtec Crystals Group
France:  COMTEC CRYSTALS SARL
23, rue du Faucon · 67500 Haguenau / FRANCE
  Tel +33 388 732162 · Fax +33 388 730118
e-Mail  sales@comtec-crystals.com
Internet  http://www.comtec-crystals.com
Sous réserve de modifications