Specifications |
Holder Type: |
CXP7050TF $13 |
Frequency Range: |
3.3V (1.0 ~ 200.0MHz), 2.5V (1.0 ~ 200.0MHz), 1.8V (1.0 ~ 125.0MHz) |
Frequency: |
00.000000 MHz Blank, Ground Frequency |
Frequency Stability at 25°C: |
±25 ppm / ±50 ppm / ±100 ppm |
Operating Temperature Range: |
-40°C to +85°C, ±25 ppm / ±50 ppm / ±100 ppm (Inclusive of 25°C tolerance, operating Temp., Supply Voltage, & Load, aging, shock and vibration) |
Storage Temperature: |
-55°C to +150°C |
Power Supply Voltage (Vdd): |
+ 3.3V D.C. ± 10%, + 2.5V D.C. ± 10%, + 1.8V D.C. ± 5%, |
PLL Off: 25MHz Supply Current: |
3.3V 30mA; 2.5V 28mA; 1.8V 20mA; (15pF) |
PLL On: 200MHz Supply Current: |
3.3V 40mA; 2.5V 35mA; 1.8V 30mA; (15pF) |
Rise/Fall Time: |
3.3V 3.0ns typ. 2.5V 3.0ns typ. 1.8V 4.0ns typ. (25MHz, PLL off) 3.3V 1.5ns typ. 2.5V 1.5ns typ. 1.8V 1.5ns typ. (200MHz, PLL off) |
Output Load: |
15pF |
Start Up Time: |
4.5ms typ.; 10ms (max.) |
Output Symmetry (Duty Cycle): |
1 MHz to 150 MHz : 50% ±5% (measured at 50% Vdd) 150 MHz to 200 MHz : 50% ±10% |
RMS Jitter: |
0.9ps typical |
SSB Phase Noise (typical) offset: |
10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz |
125.000 MHz@3.3 dBc/Hz: |
-61 -89 -110 -119 -119 -142 -149 |
Output Enable /Disable Time: |
70% of Vdd (min) to Enable / 30% of Vdd (max) to Disable |
Power Down Mode (code: PD): |
Disable Current:300µA (typ.); 400µA (max. ) Output Enable Time:4.5msec (Typ); 10msec (max.) |
Stand-by Mode (Code: SB): |
Disable Current: 18mA (typ.); 22mA (max. ) Output Enable Time : 10ms (max.) |
Reflow Condition: |
260°C max. for 10 sec. |